Free Load Planner
Enter your products and see which container or truck they fit in, in 3D. No sign-up.
Choose a vehicle
Auto-select, a standard container or a truck
Auto-select · Container
We pick the best container for your products; if one is not enough we suggest more.
20' STANDARD
5.90 × 2.35 × 2.39 m
40' STANDARD
12.03 × 2.35 × 2.39 m
40' HIGH-CUBE
12.02 × 2.35 × 2.70 m
45' HIGH-CUBE
13.56 × 2.35 × 2.70 m
20' OPEN TOP
5.89 × 2.35 × 2.32 m
40' OPEN TOP
12.03 × 2.34 × 2.33 m
20' FLATRACK
5.70 × 2.23 × 2.24 m
40' FLATRACK
11.83 × 2.23 × 2.20 m
20' FLATRACK COLLAPSIBLE
5.68 × 2.21 × 2.27 m
40' FLATRACK COLLAPSIBLE
11.66 × 2.20 × 2.25 m
20' REEFER
5.44 × 2.29 × 2.28 m
40' REEFER
11.58 × 2.29 × 2.12 m
40' HIGH-CUBE REEFER
11.58 × 2.29 × 2.55 m
20' BULK
5.93 × 2.36 × 2.34 m
45' PALLET WIDE
13.56 × 2.45 × 2.68 m
Auto-select · Container
When you press Calculate, the smallest vehicle that takes the load is found and shown below in 3D; if one is not enough, the plan with the fewest vehicles is suggested.
Add products
HS Code, package, dimensions and quantity, just like the offer form
Add at least one product.
No products yet
Add products one by one or upload them in bulk via CSV.
Vehicle
Auto (container)
Products
0 products · 0 units
Total weight
0 kg
Total volume
0 m³
Load plan
Once calculated, the layout appears here in 3D
Enter your products and press "Optimize". The best layout will appear here in 3D.
Quick answer
The LogiFindex load planner shows which container or truck your cargo needs and how it sits inside. You enter each product with its dimensions, unit weight, quantity and package type (carton, big bag, sack, barrel or roll); it picks the smallest suitable vehicle - or suggests two if one is not enough - and draws the loading layout in 3D with weight, volume and balance. It is free without an account: one plan per day on each computer or phone.
What you get
- The right vehicle - the smallest of 20', 40', 40' high-cube and 45' containers (or a 13.6 m / mega trailer) that takes the whole load.
- A 3D layout - every carton, pallet, barrel, roll, sack and big bag in its place; rotate and click to inspect.
- Weight and balance - payload use, volume use and whether the centre of gravity stays within the recommended band.
- No forcing - if something does not fit under the loading rules, it is listed with the reason instead of being squeezed in.
Free plan and full version
| Free (this page) | Carrier account | |
|---|---|---|
| Plans | 1 per day per device | Unlimited |
| Vehicles | Standard containers and trailers | Plus your own saved vehicles |
| Products | Up to 5 product lines | Up to 300 lines, CSV import |
| Axle loads | - | Yes |
How to use it
- 1Choose "Auto-select" or a container / truck.
- 2Add your products: dimensions, unit weight, quantity, package; pallet and stacking if needed.
- 3Press Calculate - the suggested vehicle and the 3D layout appear below.
Frequently asked questions
Is the load planner free?
+
Yes. Without an account you get one plan per day on each computer or phone; it renews at midnight (Türkiye time). Carriers get unlimited plans in their panel.
Which containers and trucks does it cover?
+
20' and 40' standard, 40' and 45' high-cube, 45' pallet-wide, reefers, open tops and flat racks; 13.6 m curtain-sider, mega and reefer trailers; truck-and-trailer (tandem / jumbo); minivan, two panel van sizes and 7.5, 12 and 18 t rigid trucks.
Does it handle pallets?
+
Yes. Choose a Euro, half-Euro, plastic Euro or 1200x1000 pallet; products are stacked on pallets up to the height limit and the number of pallets is calculated.
How accurate is the plan?
+
Dimensions, weights, stacking and door openings are respected. Flexible or round packages (sacks, big bags, barrels, rolls) are planned by their outer box, so treat the result as a planning guide and confirm with your carrier.